RGB to Spot Color Converter
Enter a screen color and see the closest matches in Color Mapper's own spot-color reference set, ranked by how different they look (ΔE2000). You also get your color's CMYK process build and how far it shifts on press, so you can see whether four-color print will hold it or a spot ink is worth asking your printer about. It's free, works with RGB, HEX, HSL, HSV or CMYK, and runs in your browser.
Color Mapper is an independent tool and is not affiliated with or endorsed by any color-standard or ink company. Results come from our own reference set.
Enter a color to see its closest matches.
What this converter gives you
For any color you enter, the converter shows:
- The closest 3 to 6 colors in our reference set, each with its code, HEX value, ΔE2000 distance and a plain-language label for how close it is. ΔE2000 is a standard formula for how different two colors look to the eye. Lower means closer, and 0 means the same screen color.
- Your color's CMYK process build, plus what it turns into after a standard CMYK round trip. That tells you whether ordinary four-color printing will keep it.
The match is the closest one in our own set, measured on screen values. It's useful for comparing options, setting up a palette, or seeing how far a color is from anything nearby. When the job is ink on paper, take the values to your printer, who will match them in the swatch system they use. The Spot color vs process color guide explains the difference.
How are RGB, CMYK and spot color different?
RGB is light. Screens mix red, green and blue light, so an RGB or HEX value describes what a display should show, and different displays show it slightly differently.
CMYK is four-color process ink. A press builds the color from cyan, magenta, yellow and black dots. Many bright screen colors, especially saturated greens, blues and neons, sit outside what CMYK can print, so they shift. You can see the numbers with the RGB to CMYK converter.
Spot color is a single ink mixed to a recipe before printing, with its own plate. It can hit colors that CMYK can't and stays consistent from run to run, which is why brands use it for logos.
Spot inks are usually chosen from one of the proprietary spot-color systems, and the printer matches the ink to a physical chip from that system.
The CMYK color model page covers process color in more depth.
Why can't a screen show a spot ink faithfully?
A spot ink is a physical thing: ink on a particular paper, seen under a particular light. Coated and uncoated paper make the same ink look different, and so do varnish and the paper's own whiteness. A screen color has none of that. It's a code that each monitor interprets with its own brightness and white point.
So every on-screen spot color, ours included, is a simulation. That's why this tool reports a distance instead of claiming a match, and why the final check for anything printed is a physical proof on the real stock.
How do I brief a printer with these results?
- Pick your screen color. Use the HEX or RGB value from your design file or brand guide.
- Check whether CMYK can hold it. Look at the shift in the process panel. If it's small, four-color print may be enough. If it's large, ask about a spot ink.
- Send the values, not our code. Give the printer the HEX, RGB and CMYK values, and use the closest reference colors to show how much leeway you're willing to accept.
- Ask which swatch system they use, and have them propose the nearest ink from it.
- Approve a printed proof on the paper you'll actually use before the full run.
To compare two candidate colors side by side, paste both into Compare colors, which reports the ΔE2000 between them.
About this reference set
The reference set is Color Mapper's own work. We built it from a regular mathematical grid, not from any commercial color library. Here's how:
- Color space: OKLCH, a perceptual color space in which equal steps look roughly equal.
- Grid: 36 hues (every 10°) × 8 lightness steps (0.25 to 0.93) × 5 chroma steps (0.04 to 0.20). We keep only the colors a standard sRGB screen can show, then add 10 neutrals. That makes 799 reference colors.
- Codes: each code describes where a color sits on the grid, for example CMS-H210-L74-C12. They're labels for positions on our grid and not ink names.
- Ranking: your input is converted to sRGB, then to CIELAB, and the set is ranked by CIEDE2000 (ΔE2000).
- What it isn't: this isn't an ink library. Nobody can mix one of our codes on press, and the set hasn't been measured on coated or uncoated paper. That's also why this version has no coated or uncoated switch.
Frequently asked questions
- Is this the same as a match from a printer's swatch book?
- No. Results come from Color Mapper's own reference set, which is a grid of screen colors and not a physical ink library. Use them to compare and communicate colors, then ask your printer to match the values in the swatch system they use and check a printed proof.
- Can I order an ink by its reference code?
- No. The codes label positions in our grid, and no printer stocks inks under them. Send your printer the HEX, RGB and CMYK values shown on this page instead.
- Does the converter show coated and uncoated results?
- Not in this version. Coated and uncoated describe how ink looks on different papers, and our set is made of screen colors that haven't been measured on paper. Tell your printer which stock you're using, and judge the proof on that paper.
- What does the ΔE2000 number mean?
- It's a standard measure of how different two colors look. 0 means the screen values are the same, and higher numbers mean a more visible difference. It compares screen values only and can't tell you how an ink will look on paper.
Related color tools
- RGB to CMYK converter: see the process build for any RGB value
- HEX to RGB converter: split a HEX code into red, green and blue
- HSV to RGB converter
- CMYK to RGB converter
- Print gamut checker: check a whole palette for CMYK shifts
- Compare colors (ΔE2000): measure the difference between two colors
- Spot color vs process color: which printing method fits your job
- CMYK color model
- Managing color from screen to press